At United Speed Racing, customer satisfaction is our number one priority. We are the number one source for your Honda Civic Type-R parts; however, we service and carry Porsche, BMW, Audi, Nissan, Toyota, Mitsubishi or Subaru and many more parts from other auto makers. We have access to hundreds of manufacturers, and thousands of aftermarket products. We cannot list all the parts on our web store, but if you do not find what you need on our web store, please feel free to contact us and we will be happy to assist finding products you need. We try to be competitive on pricing, if you find the same item elsewhere, we will try our best to price match**
aFe Lowering Springs are engineered to optimize the factory shock absorber damping and offer a .8" front and .8" rear drop for the perfect blend of performance and style.
19 row Setbrab oil cooler with ducting setup. Retains factory brake cooling ducting. Include all lines and hardware. Improve engine cooling. Lower engine temperature. Some trimming on splash shield & side grille required. Pre-cut side trim grille is available to purchase. GReddy Oil Cooler Block is available to substitute for standard oil sandwich...
aFe Control Stage 1 Package features sway bars and springs designed to provide your Honda Civic Type-R with racecar level road holding ability and the street-ability you would expect from your daily driver.
- Fully Tested on our USR TimeAttack 2017 Honda Civic Type-R (2WNR installed) - Complete kit camber plates with springs. - We are the only shop that offers a complete kit for Honda Civic Type-R, the only thing to choose are the spring rates. - The best suspension you can have for any type of motorsports you do. Made in the USA.
Torque capacity: 467 ft-lbs
The FK8 is equipped with a water-cooled oil cooler to stabilize the extreme high engine output. However, under circuit driving, the temperature of both oil & water rise because adequate heat radiation cannot be obtained & limp mode may activate.Adding HKS air cooling type oil cooler kit provides high heat exchange efficiency to suppress the...
27mm 2 point adjustable sway bar
Kits Include:(1) 4-ply Silicone Hose(4) Stainless Hose Clamps(1) Billet Evap Flange
‘Typical’ New Dry Boiling Point: 320°C (608°F)‘Wet’ E.R. (Equilibrium Reflux) Boiling Point: 199°C (399°F) Prior to the development of R4, R3 was the fluid of choice in many professional racing series around the world.Conforms to and exceeds FMVSS 116 DOT 4 and SAE J1703 and J1704.
Adjustable extra heavy duty
Front Disc Brake Rotor - Price is per rotor - Special order
Features AP Racing CP9660 Radi-CAL six piston calipers 355x32mm, 72 vane AP Racing disc Saves 5 unsprung lbs. from nose vs. OEM brakes Every component designed to resist the heat of extended track sessions Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system Designed to work with OEM rear brakes
Torque capacity: 391 ft-lbs
Currently available in Satin Titanium and Machine Black. Sold as a set.