Manufacturers

Information

Welcome to United Speed Racing!

Welcome to United Speed Racing!

Home of best performance parts for your sport car.

Customer satisfaction is our number one priority.  Feel free to contact us with any questions regarding upgrades for your Porsche, BMW, Audi, Nissan, Toyota, Mitsubishi or Subaru.  We have access to hundreds of manufacturers, and thousands of products.  Unfortunately, we cannot list all the parts on our web store. However, if you do not find what you need on our web store, please contact us and we will be happy to assist finding your product.  We offer the best prices on parts, if you find the same item elsewhere, we will price match the item.**  

**Item must be available in stock at the price-matched shop and not against manufacturer's minimum advertise policy.  Other restrictions may apply.  
  • $ 399.00

    FREE GROUND SHIPPING within the lower US states. All pieces are fully back-purged for weld integrity and optimal strength while the front pipe features a high quality, reinforced stainless flex section. Customers can run an aftermarket exhaust or the factory exhaust.

    $ 399.00
  • $ 1,980.00

    Available in 3 configurations for FK8 Civic Type-R: Front: 18x9.5 5-120 +45 Rear: 18x9.5 5-120 +45 Wts: 18.1 LBSFront: 18x9.5 5-120 +35 Rear: 18x9.5 5-120 +35 Wts: 18.1 LBSFront: 19x9.5 5-120 +45 Rear: 19x9.5 5-120 +45 Wts: 20.6 LBS Available colors:Stain TitaniumMachine BlackTechna Bronze (only available in 18x9.5 5-120 +45)

    $ 1,980.00
  • $ 20.00

    Converts 60 degree conical seat nuts to ball seat Can be used with all Motorsport Hardware standard conical and extended race nuts Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25 Inserts between wheel and conical nut Manufactuered from hardended steel Zinc plated 20 total

    $ 20.00
  • $ 189.95 $ 199.95 -5%

    FREE GROUND SHIPPING! Each kit features the following: -Anodized oil catch can with integrated condenser and dipstick-Anodized aluminum Honda FK8 specific mounting bracket-Anodized aluminum -AN adapter fittings and hose ends-Enough PCV hose for custom applications  -Stainless steel mounting hardware

    $ 189.95 $ 199.95 -5%
    Reduced price!
  • $ 321.80 $ 585.09 -45%

    Guaranteed to increase horsepower Designed to improve throttle response and engine sound Low restriction aluminum tube Easy to install, usually in 90 minutes or less Lasts up to 100,000 miles before service is required (depending on driving conditions) Replaces stock air intake system Washable and reusable lifetime air filter K&N Million Mile Limited...

    $ 321.80 $ 585.09 -45%
    Reduced price!
  • $ 399.00

    FREE GROUND SHIPPING within the lower US states.Cast Stainless 3.70" transitioning to a 3.50" center pipe tapered to 3.00" outlet Fits Factory Heat Shields  Includes Gasket, Hardware and O2 Extension

    $ 399.00
  • $ 335.20 $ 419.00 -20%

    Swift Spec-R Sport Springs for the 2017+ Honda Civic Type-R Front spring rate: 6.3 Kg/mm Rear spring rate: 7.4 Kg/mm

    $ 335.20 $ 419.00 -20%
    Reduced price!
  • $ 299.00
    Sale!

    Using premium grade 8740 alloy that is rated far superior to “aircraft” quality each stud is placed vertically in special racks and precisely heat-treated to 190,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers.

    $ 299.00
  • $ 119.52 $ 132.80 -10%

    Adjustable extra heavy duty

    $ 119.52 $ 132.80 -10%
    Reduced price!
  • $ 494.10 $ 549.00 -10%

    Contains BHF97Z, BHR97Z, KLC140-335 and KLC217 - essential to 'Activate more grip' 27mm 2 point adjustable front sway bar  22mm 2 point adjustable rear sway bar

    $ 494.10 $ 549.00 -10%
    Reduced price!
  • $ 899.00

    The cost of unlocking is $300 (included in the pricing) and that includes return overnight shipping in the United States. Once you made the purchase, please fill this form out and send it to sales@unitedspeedracing.com

    $ 899.00
  • $ 29.95

    ‘Typical’ New Dry Boiling Point: 320°C (608°F)‘Wet’ E.R. (Equilibrium Reflux) Boiling Point: 199°C (399°F) Prior to the development of R4, R3 was the fluid of choice in many professional racing series around the world.Conforms to and exceeds FMVSS 116 DOT 4 and SAE J1703 and J1704.

    $ 29.95
  • $ 779.00
  • $ 200.00
    New

    BMSPEC rear spoiler extension for the 10th generation Civic hatchback. “Gurney Flap” style add-on: simple design works w/ OEM spoiler to provide downforce & stability at speed. Mounted with screws for durability: The extension solidly threads in to your spoiler at 4 points, w/ extra tape to protect your paint.

    $ 200.00
  • $ 648.33 $ 682.45 -5%

    Direct fit for All 2017- 2018 Honda Civic Type-R  • Dyno-proven maximum gains of up to 27 HP and 23 Ft. Lbs. of Torque• Outlet temperature up to 30º lower than stock intercooler• Stock Pressure Drop Retained within 0.5 psi• Designed to work with stock calibration• Increases throttle response and decreases turbo lag• 21.06” x 5.75” x 5.28” Core Size TWICE...

    $ 648.33 $ 682.45 -5%
    Reduced price!
  • $ 303.76 $ 323.15 -6%

    For 2017 HONDA CIVIC TYPE R (FK8) 2.0LIT TURBO 4CYL Polished, black, or wrinkle red finish available Short Ram Air Intake System with SuperNano-Web Dry Air Filter

    $ 303.76 $ 323.15 -6%
    Reduced price!