Tow hook setup for FK8 Type-R. Installed at right front area. Included: 1 x tow hook bracket 1 x hardware kit Optional part 1: M16x1.5 Tow hook
19 row Setbrab oil cooler with ducting setup. Retains factory brake cooling ducting. Include all lines and hardware. Improve engine cooling. Lower engine temperature. Some trimming on splash shield & side grille required. Pre-cut side trim grille is available to purchase. GReddy Oil Cooler Block is available to substitute for standard oil sandwich...
Please contact us for shipping rate. Website default shipping is with UPS/FedEx, logistic freight service available to lower the cost of shipping. Direct bolt in, no trimming, cutting no modification 1.5" DOM Roll Cage tubing, 4130 Chromoly interlocking tube connectors, and grade 8 hardware.
In stock. USR CTR Downpipe replaces factory catalytic converter. smooth 4" diameter to 3" design come with basic secondary O2 defouler to eliminate CEL. direct bolt on. For off road use only Please note: Ceramic coating lead time is minimum of a week up to the coater's schedule.
Sold Out, ETA 12/30. 1x Lava Turbo Blanket for Honda FK8 Civic Type-R Lower engine compartment ambient temperature & make turbo more efficient USR Turbo Blanket not only enhances the look of the engine compartment area, it also reduces a significant amount of heat transfer to surrounding components Custom serial number available
Genuine Honda under hood fender trims as fitted to the European model FK8. Sold as a pair
Improve engine cooling Lower engine temperature come with all necessary hardware Work with stock or PRL intercooler at advised location. Mishimoto, and Injen intercoolers will need to mount elsewhere.
FREE SHIPPING!Limited quantities currently in stock & ready to ship. Direct fit for the 2017+ Honda Civic Type R 42% increase in flow over the stock intake system Silicone elbow eliminates restrictions and improves and increases airflow capacity Precision-adjusted CNC aluminum MAF housing allows for better flow
Available in 2 configurations for FK8 Civic Type-R: Front: 18x9.5 5-120 +45 Rear: 18x9.5 5-120 +45 Wts: 18.7 LBSFront: 18x9.5 5-120 +35 Rear: 18x9.5 5-120 +35 Wts: 18.7 LBS Available colors:Stain TitaniumMachine BlackTechna Bronze (only available in 18x9.5 5-120 +45) CONTACT US FOR SHIPPING QUOTE!
The HKS Intercooler Piping Kit for the new 2017+ Civic Type R is engineered to smooth flow and prevent piping deformation! This kit includes hot and cold side pipes with the necessary clamps and bands to fit perfectly with the OEM or OEM style intercoolers. The aluminum piping ensures zero deformation under vacuum with smooth walls for laminar air flow.
IN STOCK! 71008-AH009 Honda FK8 Civic Type-R SSQV4 BOV Kit
Performance Tuned Handling. Further Reduce Body Roll. Precision Engineered for PRO-KIT & SPORTLINE Performance Lowering Spring Kits. Part of the Eibach PRO-PLUS, PRO-SYSTEM-PLUS, SPORT-PLUS & SPORT-SYSTEM-PLUS. Million-Mile Warranty
- Fully Tested on our USR TimeAttack 2017 Honda Civic Type-R (2WNR installed) - Complete kit camber plates with springs. - We are the only shop that offers a complete kit for Honda Civic Type-R, the only thing to choose are the spring rates. - The best suspension you can have for any type of motorsports you do. Made in the USA.
FREE GROUND SHIPPING within continental US states. Features AP Racing CP9660 Radi-CAL six piston calipers 355x32mm, 72 vane AP Racing disc Saves 5 unsprung lbs. vs. OEM brakes
FREE GROUND SHIPPING! When it comes to Type-R, we at United Speed Racing (USR) are always the first to test for GiroDisc's line up. - Each GiroDisc rear 2-piece rotors weighs only 9.0 lbs, stock rear rotor weighs approximately 12lbs, that's 3 lbs unsprung weight saving per corner, not to mention better rotor heat dissipation!
Ferodo is an OEM supplier to the world's leading car manufacturers, and are used by many of the top names in motorsports. The Ferodo Racing pad range includes some of the most advanced braking materials available today. Ferodo Racing now produces their pads in Modovi, Italy. Ferodo race pads are available in several compounds, the choice of which depends...
Please choose brake compound from the pull-up menu. Performance Ceramic / HPS / HPS 5.0 / HP Plus / DTC-30 / DTC-50 / DTC-60 / DTC-70 / DTC-80 / HT-10 / Blue 9012
Please choose brake compound from the pull-up menu. Available in Performance Ceramic or HPS 5.0, HP+ and DTC30
Lead time 5-7 business days after order received. Brand new Honda OEM grill and manually cut each section out. This will work for most aftermarket oil coolers that utilize left grill area.
FREE GROUND SHIPPING within continental US states. Power Rating: 550 HP Core Size: 26.5" x 3.5" x 7.0" Fin Style: Bar-and-Plate End Tank Design: 5-Axis CNC'd Billet Aluminum
FREE SHIPPING! Included-2-Piece Billet Aluminum Tank-Aluminum Mounting Bracket -Aluminum Adapter Fittings-Heater Hose, 5/16"-Overflow Hose, 7/32"-Stainless Steel Hardware