HPD K20C1 CRATE ENGINE $299 FREIGHT SHIPPING* | TITAN 7 WHEELS SET FREE SHIPPING*
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV
  • SKU: A0232A

Verus Engineering Front Splitter Kit -2020+ Toyota Supra GR A90-A91-MKV

$1,599.95 $1,759.95
Shipping calculated at checkout.
DESCRIPTION

VERUS ENGINEERING FRONT SPLITTER KIT FOR 2020+ TOYOTA SUPRA GR A90/A91/MKV/MK5 

Front splitters are very effective at producing front-end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. Utilizing scan data directly from the car and CFD, Verus Engineering was able to produce a splitter that pairs well with their UCW rear wing and can easily handle the loads seen by the splitter. The splitter mounts to multiple chassis locations for a strong and durable mounting style. All hardware locations are recessed for improved aerodynamic performance.

The splitter is produced from a carbon polyweave, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either.  The material is also lightweight and stiff; which makes it a great splitter material.

The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further.  The air dam is produced from sheet aluminum and then powder coated black for durability.

What Is Included:

  • Two-Piece Carbon Polyweave Splitter Blade

  • Two-Piece Aluminum Front Air Dam

  • Sheet Aluminum/Steel Chassis Bracket (10 Pieces)

  • Rubber Splitter Edge Seal

  • Hardware Kit Including All Necessary Bolts/Nuts/Washers

 

 

REVIEWS

RECENTLY VIEWED PRODUCTS

BACK TO TOP